Stein SMB1000 Rigging Bollard
RRP is £276.00 (Inc VAT)
Saving of £42.00
Stein SMB1000 Rigging Bollard Description
The STEIN SMB1000 single bollard lowering device has a WLL of 1000kg and designed to work effectively with ropes of up to 14mm (Recommended Rope - STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear.
To help prevent damage to the tree the device is fitted with 2 replaceable heavy duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber.
The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004).
For added security it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling - STEIN 20mm Multi-Sling SS-3372008005).
Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength.
This strapping system allows the device to be fitted to tree with a diameter of up to 145cm.
The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the
buckle before failure.
Stein SMB1000 Rigging Bollard Features
- Working Load Limit - 1000kg (WLL) refer to manual
- Dimensions - 210mm (w) x 310mm (h)
- Bollard Dimension - 73mm diameter x 140mm (l)
- Materials - Back Plate 5mm Steel
- Fairleads - 15mm Solid Bar
- Body Finish - Powder coated
- Bollard Finish - Lacquered with Rust Prevention
- Rubbers - 148mm (l) x 50mm (w) x 50mm (h)
- Rubber Material - SBR/NR rubber
- Rubber Hardness - 70 medium/hard (Shore A Scale)
- Strapping System - Ratchet Handle with tail
- Webbing length - 4.65m (5.0m combined with Ratchet Handle)
- Weight - 4.4kg (excluding Ratchet Strap), 5.8kg (Including Ratchet Strap)
Stein SMB1000 Rigging Bollard Arrange a Consultation
The STEIN SMB1000 single bollard lowering device has a WLL of 1000kg and designed to work effectively with ropes of up to 14mm (Recommended Rope - STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear.
To help prevent damage to the tree the device is fitted with 2 replaceable heavy duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber.
The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004).
For added security it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling - STEIN 20mm Multi-Sling SS-3372008005).
Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength.
This strapping system allows the device to be fitted to tree with a diameter of up to 145cm.
The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the
buckle before failure.
- Working Load Limit - 1000kg (WLL) refer to manual
- Dimensions - 210mm (w) x 310mm (h)
- Bollard Dimension - 73mm diameter x 140mm (l)
- Materials - Back Plate 5mm Steel
- Fairleads - 15mm Solid Bar
- Body Finish - Powder coated
- Bollard Finish - Lacquered with Rust Prevention
- Rubbers - 148mm (l) x 50mm (w) x 50mm (h)
- Rubber Material - SBR/NR rubber
- Rubber Hardness - 70 medium/hard (Shore A Scale)
- Strapping System - Ratchet Handle with tail
- Webbing length - 4.65m (5.0m combined with Ratchet Handle)
- Weight - 4.4kg (excluding Ratchet Strap), 5.8kg (Including Ratchet Strap)
Shop Online with confidence. Winchester Garden Machinery, a family-run business, are one of the largest retailers of garden machinery in the UK. We have been established for over five decades serving organisations, businesses, and valued customers both in store and online. Our four showrooms are based in the south, but you will experience the same high level of quality of service from our 50+ knowledgeable staff when you shop online or by phone, as you would do in our showrooms.
Fast Delivery
Most products are shipped to be delivered in 2-5 days as standard. Next day service is offered, please check shipping options upon checkout. Larger items, such as Tractors & Chippers will take longer.
Authorised Dealers
We are authorised retailers for all of the equipment we sell including top brands such as Honda, Stihl, Husqvarna, Hayter, Toro and Countax.
Price Promise
A vast majority of our products for sale online have discounts applied so we are always competitive on price. If you feel we are not competitive enough, please contact us and let us know.
Aftersales
As a top retailer we offer expert advice on the machinery we sell, along with servicing and spare parts.
Commitment to Quality
Our friendly and professional staff are available by telephone or email to give expert advice on the best machines to suit your requirements and ensure that you receive the best quality at the right price.